Unclogging drains can be a very stressful task. The accumulation of the different types of dirt that have successfully passed through the drain cover is the primary culprit for an inefficient and non-functional drainage system. The accumulated dirt may range from hair strands to oil-based chemical substances coming from all the different kind of stuffs that we use when we take a bath.
In a clogged-up drainage system, the water that you use when taking bath could no longer pass through the hole because the collected wastes have practically invaded the inner lumen of the pipes. The trapped hair strands and all the other crude-like chemical substances that have adhered along the sides of the pipes make it truly difficult for water to pass through the constricted space.
Therefore, it is still very helpful to clean the drain cover regularly. Remove all the materials that were trapped on its surface. If taken for granted, a clogged bathroom drain could really lead to a lot of serous problems such as additional financial burden and physical distress. In order to unclog your drainage system, it is very important to identify the root of the problem. Remove all the possible materials that have been trapped through the holes. If still ineffective, you may start using a wide range of tools that may help your drainage system get back to its normal functioning.
Before putting anything into the hole, it may be helpful to let the drain stand for at least three hours. Boil at least three liters of water and then slowly pour it through the hole. This will help dissolve all the oily chemical substances that may have constricted the lumen of the pipe. Maintain great caution when pouring out hot water in order to prevent burn. Let the drain stand again for another three hours before rechecking its function.
However, if hot water does not work, you may start using flexible wire hangers and drain claws. These tools are available in your nearest hardware store. Flexible wire hangers and drain claws are relatively long and may reach the interior of your pipes. These tools are very effective in removing dirt on the upper portion of your piping system.
Snake is another very efficient tool in removing clogged up materials inside your pipes. Snakes can reach a distance of 25-50 feet long. Its unique design allows the pliable steel to be propelled to the lower portion of your pipes. This mechanism enables it to reach and remove the clogged materials on the lower portion of your piping system.
The entire unclogging procedure may be reinforced further with the help of plungers and drain vacuums. By applying negative pressure, the accumulated waste materials are pulled back. This will truly help in actually solving the problem since the pipes are actually freed from accumulated wastes.
Nevertheless, if your drainage system still fails to work, you may opt to use commercially prepared drain cleaners. It is also imperative that you should never let these materials come in contact with any part of your body because these are highly corrosive. You have to also store these substances safely in order not to be reached by children. If still unsuccessful, it would be a wise decision to call the plumber within your jurisdiction.
Author Resource:-
Need an emergency plumber in Toronto? Mississauga plumber and drains Toronto cleaning specialists offer a complete line of services including sewer line cleaning, leak detection, pipe and food disposal repair.
![[Valid RSS feed]](http://www.massagebyben.com/articles/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites 